 |
Remove both cap plugs from the tube and remove Vacsoc form within corrugated installation tube package. Also, remove the printed sleeve form around the tube package. |
 |
Stretch one of the Vacsoc over top of the tube and commence to slide the entire length of Vacsoc tightly around the entire length of the tube to ensure it fits. Ensure the eintire Vacsoc is on the installation tube. |
 |
Insert wall end of the vacuum hose through the installation tube and slide the installation tube all the way through to the handle end of the hose. |
 |
Pull two to three inches of Vacsoc off the installation tube and secure firmly to the hose using elestic ties. Secure as close to the handle of end as possible. |
 |
Holding the hose securely, slide the installation tube along the hose allowing Vacsoc to discharge freely onto the hose. |
 |
Once at the other end, remove tube and if necessary, fold back any excess length of Vacsoc into pleat. Then tie end securely to the hose. |
 |
Hose Hugger-Cloth web belt with velcro closures keep hose coiled. Makes it easy to remove from hose hanger and carry. |